I bought a Dolica PS-240 Portable Photo Studio Kit. It contains two studio lamps, a small camera stand, a dual-sided non-reflective background screen and 4 background drops (black, white, red and blue). The main element of the kit is a bag, where you can store lamps, camera stand and background drops. It is very easy to install, in fact the bag itself is a tent. The dimensions of the tent are 45 * 9 * 45 cm (17.5 * 3.5 * 17.5 inches). Its price is very low approximately 60 USD. Of course, it is not the highest quality photo studio kit, but, it is a quite good solution for hobby purposes. Studio lights are just a lamp having professional design. Unfortunately, they can work for no more than 10 minutes without a break.
So, I was working (or playing) with this kit. Before starting, I had to iron out the background drops. Well, I am not very good at ironing and I was afraid of burn the background. Some process of ironing lasted for about half hour. The white background looked better; the black one remained a bit creased.
The first subject to be captured was an old Soviet camera. I decided to use white background. It was my first experiment with lighting. My approach was far from scientific; I just switched on the lights and moving them checking the result. I did not have much time to experiment, as the light can work for only 10 minutes. However, this stage is very enjoyable. Believe me. :)
The most problematical was the usage of the camera stand. Fixing the camera is not easy. I had to hold the camera, find its horizontal position and fixing the bolt at the same time. I hated it.
The tent and the camera stand stood in a table. It was also a problem, as I could capture only the top of the subject. The only solution was to bend the tripod. Here, there was a possibility to play again while fixing the camera. I had to say this camera stand is not my favorite. Later, I took it away and use my tripod instead.
At the end, I could take some shots. The subject, the old camera was black with some shine metallic lines. I realized that a bit overexposing the photo, the white background became almost invisible.
This technique works well until the subject is dark. If you examine the sample shot, you can realize that the background is not white enough. It is because I used the automatic white balance. It would have be better to use manual settings.
I met a problem during using the white background. I was in a hurry to install the photo studio so mush that I forgot to take away the tablecloth. I cannot realize it until I switched on the lights. Then I was too lazy to take the tablecloth out. Now, I have a pretty nice shot, where you can see its pattern through the white background. :(
I had some problem with the black background, too. As I mentioned it was not smooth enough, as I was not very good at ironing. The tine waves could be seen on my every shot.
I started playing with exposition like in case of the white background. Of course, I wanted to make my capture darker. But, it did not work well. The subject itself became dark too.
I do not have PS, as it is too expensive not for me but for my wife. :) She tries to limit financial outgoings on my new hobby. Well, I would better buy a DSLR camera instead of PS. Fortunately, the GIMP is always with you. I made a small postwork on my shots with black background with gimp. With adjusting color levels function I cut off the black tones from my capture. Such way, I got a nice black background instead of dark waves.
